Maytag MER4351AAB Installation Manual - Page 4

ANTI-TIP DEVICE INSTALLATION INSTRUCTIONS STEP 3 - Range Installation A. A free-standing range may be installed by one person. B. Align the range to its designated location and slide it back into position. Note: A minimum clearance of 1/4² (6 mm) is required between the range and the leveling foot that will engage the ANTI-TIP bracket, see figure 4. CAUTION: Damage to the range may occur if range is moved or lifted by grasping the main top or backguard. D. For SAFETY CONSIDERATIONS as well as optimum performance adjust the range so that it is level. This may be checked by placing a spirit level or a large pan of water on the cooktop or the oven rack. If an adjustment is required pull the range forward, tip the range and rotate the leveling feet as required. E. To check the range for proper installation of the anti-tip bracket: Use a flashlight and look underneath the bottom of the range to see that one of the rear leveling feet is engaged in the bracket slot. C. All freestanding ranges with a glass top have a non lift-up top. Coil tops are lift-up. F. Proceed with the remainder of the installation instructions provided with the range. NOTE: USE A MINIMUM OF (2) SCREWS TO INSTALL ANTI-TIP BRACKET TO THE WALL OR FLOOR. FIGURE 4 -4-