Maytag MGD6630HW Installation Instructions - Page 26
Remove rotating assembly, Reinstall hinge assembly on opposite side, Reposition rotating assembly,
![]() |
View all Maytag MGD6630HW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
8. Reinstall hinge assembly on opposite side 10. R eposition rotating assembly and tubing Flip over the inner door to the left. Using a T20® screwdriver, reinstall the hinge assembly on the opposite side from which it was removed. DOORS WITH ELECTRICAL WIRING: 9. Remove rotating assembly Reposition rotating assembly and tubing 180° to opposite side of the door. 11. Rotate assembly bottom and fasten in place Press tubing into indents. Lift off inner door assembly. Using a Phillips screwdriver, remove the two screws securing the rotating assembly to the door. Rotate bottom of assembly 180° towards you and secure assembly with the two screws removed earlier, using a Phillips screwdriver. Press tubing into indents. IMPORTANT: Make sure to swing hinge down in front of rotating assembly (see Step 12). 26
![](/manual_guide/products/maytag-med5630hw-installation-instructions-31837b6/26.png)