Maytag MGDE300VF Use and Care Guide - Page 5

Gathethr erequiretdoolsandpartsbeforsetartinignstallatioRne. aadndfollowthe instructions provided with any tools listed here. • 8" or 10" pipe wrench • 8" or 10" adjustable wrench (for gas connections) • Flat-blade screwdriver • Adjustable wrench that opens to 1" (2.5 cm) or hex-head socket wrench (for adjusting dryer feet) • V2' nut driver or socket wrench (recommended) • I.evel • Knife • Vent clamps • Pipe-joint compound resistant to I.P gas • Caulking gun and compound (for installing new exhaust vent) • Pliers • Tape measure Parts supplied Remove parts packages from dryer drum. Check that all parts are included. 4 Levering legs NOTE: Do not use leveling legs if installing the dryer on a pedestal Parts needed Check local codes. Check existing electrical supply and venting. See "Electrical Requirements" and "Venting Requirements" before purchasing parts. Mobile home installations require metal exhaust system hardware available for purchase from the dealer from whom you purchased your dryer. For further information, please refer to the "Assistance or Service" section. Are you placing the dryer on a pedestal? You have the option of purchasing pedestals of different heights separately for this dryer. You may select a 10" (25.4 cm) or 15.5" (39.4 cm) pedestal with drawer. The pedestal will add to the total height of the dryer for a total height of approximately 48" (121.9 cm) or 53.5" (135.9 cm), respectively. For a garage installation, you will need to place the 10" (25.4 cm) pedestal at [east 9" (22.9 cm) above the floor. You will need to place the 15.5" (39.4 cm) pedestal at [east 3.5" (8.9 cm) above the floor. A A. !0" (25.4 cm) pedestal B. 15.5" (39.4 cm) pedestal The pedestals are available in several colors. To ordeb ca[[ the dealer from whom you purchased your dryer or refer to the "Assistance or Service" section. iiiiiii!!!i Pedestal Height 10" (25.4 cm) 15.5 II (39.4 cm) 15.5 II (39.4 cm) 15.5" (39.4 cm) 15.5" (39.4 cm) Color White White Crimson Evergreen Oxide Part Number MH P1000SQ XH P1550VW XH P1550VF XH P1550VP X H P1550VJ Stack Kit Are you planning to stack your washer and dryer? To do so, you will need to purchase a Stack Kit. To ordeb ca[[ the dealer from whom you purchased your dryer or refer to the "Assistance or Service" section. Ask for Part Number 8212640. Door Reversal Kit Are you planing to reverse the door swing direction on your PERFORMANCE SERIES dryer? To do so, you will need to purchase a Door Reversal Kit. To order; call the dealer from whom you purchased your dryer or refer to the "Assistance or Service" section. Ask for Part Number W10200372. Backguard If you are installing your PERFORMANCE SERIES washer and dryer and wish to avoid having loose items fall behind your machines, you may purchase a pair of washer/dryer backguards. These will reduce the chance of items falling behind the machines during operation. To order; call the dealer from whom you purchased your dryer or refer to the "Assistance or Service" section. Ask for Part Number 8558694 (White).