Maytag MGR5765QDW Use and Care Guide - Page 14

Locking the Control, and Oven Door, Fault Codes, Baking, Cook & Hold - problems

Page 14 highlights

Locking the Control and Oven Door The touchpad controls and oven door can be locked for safety, cleaning, or to prevent unwanted use. They will not function when locked. If the oven is currently in use, the controls and door cannot be locked. The current time of day will remain in the display when the controls are locked. To lock: Press and hold the CANCEL and Cook & Hold pads for three seconds. (Press CANCEL pad first.) • LOCK flashes in the display. To unlock: Press and hold the CANCEL and Cook & Hold pads for three seconds. (Press CANCEL pad first.) • LOCK disappears from the display. Fault Codes BAKE or LOCK may flash rapidly in the display to alert you if there is an error or a problem. If BAKE or LOCK flash in the display, press CANCEL pad. If BAKE or LOCK continue to flash, disconnect power to the appliance. Wait a few minutes, and then reconnect power. If the flashing still continues, disconnect power to the appliance and call an authorized servicer. Baking To set Bake: 1. Press the Bake pad. • BAKE will flash. • 000 will light in the display. 2. Select the oven temperature. The oven temperature can be set from 170° to 550°. Press or press and hold the More+ or Less- pads. • 350° will light when either pad is first pressed. • Press the More+ pad to increase the temperature. • Press the Less- pad to decrease the temperature. 3. Press Bake pad again or wait four seconds. • BAKE will stop flashing and light in the display. • 100° or the actual oven temperature will display. The temperature will rise in 5° increments until the preset temperature is reached. 4. Allow the oven to preheat for 8-15 minutes. • When the set oven temperature is reached, one long beep will sound. • To recall the set temperature during preheat, press the Bake pad. 5. Place food in the oven. 6. Check cooking progress. Cook longer if needed. 7. When cooking is finished, press CANCEL. 8. Remove food from the oven. Notes: • To change the oven temperature during cooking, press the Bake pad, then the More+ or Less- pad until you reach the desired temperature. • To change the oven temperature during preheat, press the Bake pad twice, then press the More+ or Less- pads until the desired temperature is displayed. • If you forget to turn off the oven, it will automatically turn off at the end of 12 hours. If you wish to deactivate this feature, see page 16. Baking Differences Between Your Old and New Oven It is normal to notice some baking time differences between a new oven and an old one. See Adjusting the Oven Temperature on page 17. Cook & Hold Cook & Hold allows you to bake for a preset amount of time, followed by a one-hour Keep Warm cycle. To set Cook & Hold: 1. Press the Cook & Hold pad. • BAKE and HOLD flash. • 000 lights in the display. 2. Select the oven temperature. The oven temperature can be set from 170° to 550°. Press or press and hold the More+ or Less- pad. • Press the More+ pad to increase the temperature. • Press the Less- pad to decrease the temperature. 3. Press Cook & Hold again OR wait four seconds. • HOLD flashes. • 00:00 flashes in the display. 4. Enter the amount of time you want to bake by pressing the More+ or Less- pad. Bake time can be set from ten minutes (00:10) to 11 hours, 59 minutes (11:59). • BAKE and HOLD light in the display. • The baking time will light in the display. • The baking time will start counting down. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

13
Locking the Control
and Oven Door
The touchpad controls and oven door can be locked for
safety, cleaning, or to prevent unwanted use.
They will not
function when locked.
If the oven is currently in use, the controls and door cannot
be locked.
The current time of day will remain in the display when the
controls are locked.
To lock:
Press and hold the
CANCEL
and
Cook &
Hold
pads for
three
seconds. (Press
CANCEL
pad first.)
LOCK flashes in the display.
To unlock:
Press and hold the
CANCEL
and
Cook & Hold
pads for
three
seconds. (Press
CANCEL
pad first.)
LOCK disappears from the display.
Fault Codes
BAKE or LOCK may flash rapidly in the display to alert you if
there is an error or a problem.
If BAKE or LOCK flash in the
display, press
CANCEL
pad.
If BAKE or LOCK continue to
flash, disconnect power to the appliance.
Wait a few minutes,
and then reconnect power. If the flashing still continues,
disconnect power to the appliance and call an authorized
servicer.
Notes:
To change the oven temperature during cooking,
press the
Bake
pad, then the
More+
or
Less-
pad until you reach
the desired temperature.
To change the oven temperature during preheat,
press the
Bake
pad
twice
, then press the
More+
or
Less-
pads
until the desired temperature is displayed.
If you forget to turn off the oven, it will automatically turn
off at the end of 12 hours.
If you wish to deactivate this
feature, see page 16.
Baking
To set Bake:
1.
Press the
Bake
pad.
BAKE will flash.
000 will light in the display.
2.
Select the oven temperature.
The oven
temperature can be set from 170
°
to 550
°
.
Press or press and hold the
More+
or
Less-
pads.
• 350
°
will light when either pad is first pressed.
Press the
More+
pad to increase the temperature.
Press the
Less-
pad to decrease the temperature.
3. Press
Bake
pad again or wait
four
seconds.
BAKE will stop flashing and light in the display.
• 100
°
or the actual oven temperature will display.
The
temperature will rise in 5
°
increments until the preset
temperature is reached.
Cook & Hold
Cook & Hold allows you to bake for a preset amount of time,
followed by a one-hour Keep Warm cycle.
To set Cook & Hold:
1.
Press the
Cook & Hold
pad.
BAKE and HOLD flash.
000 lights in the display.
2.
Select the oven temperature. The oven
temperature can be set from 170
°
to 550
°
. Press
or press and hold the
More+
or
Less-
pad.
Press the
More+
pad to increase the temperature.
Press the
Less-
pad to decrease the temperature.
3. Press
Cook & Hold
again OR wait
four
seconds.
HOLD flashes.
00:00 flashes in the display.
4.
Enter the amount of time you want to bake by pressing the
More+
or
Less-
pad.
Bake time can be set from ten
minutes (00:10) to 11 hours, 59 minutes (11:59).
BAKE and HOLD light in the display.
The baking time will light in the display.
The baking time will start counting down.
4.
Allow the oven to preheat for 8-15 minutes.
When the set oven temperature is reached, one long
beep will sound.
To recall the set temperature during preheat, press the
Bake
pad.
5.
Place food in the oven.
6.
Check cooking progress.
Cook longer if needed.
7.
When cooking is finished, press
CANCEL
.
8.
Remove food from the oven.
Baking Differences Between Your Old
and New Oven
It is normal to notice some baking time differences between a
new oven and an old one.
See
Adjusting the Oven Temperature
on page 17.