Maytag MGR5775QDB Use and Care Guide - Page 23

Maintenance

Get Maytag MGR5775QDB - 30inch Gas Range PDF manuals and user guides View all Maytag MGR5775QDB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Maintenance Oven Door CAUTION Do not place excessive weight on or stand on an open oven door. This could cause the range to tip over, break the door, or injure the user. Note: The oven door on a new range may feel "spongy" when it is closed. This is normal and will decrease with use. Oven Window To protect the oven door window: 1. Do not use abrasive cleaning agents such as steel wool scouring pads or powdered cleansers as they may scratch the glass. 2. Do not hit the glass with pots, pans, furniture, toys, or other objects. 3. Do not close the oven door until the oven racks are in place. Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later date. Leveling Legs CAUTION Be sure the anti-tip bracket secures one of the rear leveling legs to the floor. This bracket prevents the range from accidentally tipping. Be sure the range is leveled when installed. If the range is not level, turn the leveling legs, located at each corner of the range, until range is level. Electrical Connection Appliances which require electrical power are equipped with a three-prong grounding plug which must be plugged directly into a properly grounded threehole 120 volt electrical outlet. Always disconnect power to appliance before servicing. The three-prong grounding plug offers protection against shock hazards. DO NOT CUT OR REMOVE THE THIRD GROUNDING PRONG FROM THE POWER CORD PLUG. If an ungrounded, two-hole or other type electrical outlet is encountered, it is the personal responsibility of the appliance owner to have the outlet replaced with a properly grounded three-hole electrical outlet. Oven Light CAUTION • Disconnect power to range before replacing light bulb. • Allow oven to cool before replacing light bulb. • Make sure bulb cover and bulb are cool before touching. To replace oven light bulb: 1. When oven is cool, hold bulb cover in place, then slide wire retainer off cover. Note: Bulb cover will fall if not held in place while removing wire retainer. BULB COVER 2. Remove bulb cover and light bulb. WIRE RETAINER 3. Replace with a 40-watt appliance bulb. 4. Replace bulb cover and secure with wire retainer. 5. Reconnect power to range. Reset clock. AANNTI-TTIIP-TBIRPACBKRETACKET LLEVEEVLIENLGILNEGG LEG 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
22
Maintenance
CAUTION
Oven Door
Do not
place excessive weight on or stand on an open
oven door. This could cause the range to tip over, break
the door, or injure the user.
Oven Window
To protect the oven door window:
1.
Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2.
Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3.
Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
Oven Light
Electrical Connection
Appliances which require electrical power
are equipped with a three-prong
grounding plug
which must be plugged
directly into a properly grounded three-
hole 120 volt electrical outlet.
Always disconnect power to appliance before servicing.
The three-prong grounding plug offers protection against
shock hazards.
DO NOT CUT OR REMOVE THE THIRD
GROUNDING PRONG FROM THE POWER CORD PLUG.
If an ungrounded, two-hole or other type electrical outlet is
encountered,
it is the personal responsibility of the
appliance owner to have the outlet replaced with a
properly grounded three-hole electrical outlet.
Note:
The oven door on a new range may feel “spongy”
when it is closed. This is normal and will decrease with use.
Leveling Legs
LEVELING LEG
CAUTION
Be sure the anti-tip bracket secures one of the rear
leveling legs to the floor. This bracket prevents the range
from accidentally tipping.
Be sure the range is leveled when installed.
If
the range is not level, turn the leveling legs,
located at each corner of the range, until
range is level.
ANTI-TIP BRACKET
CAUTION
•
Disconnect power to range before replacing light bulb.
•
Allow oven to cool before replacing light bulb.
•
Make sure bulb cover and bulb are cool before touching.
To replace oven light bulb:
1.
When oven is cool, hold bulb cover
in place, then slide wire retainer
off cover.
Note:
Bulb cover
will fall if not held in place
while removing wire retainer.
2.
Remove bulb cover and light
bulb.
3.
Replace with a 40-watt appliance bulb.
4.
Replace bulb cover and secure with wire retainer.
5.
Reconnect power to range. Reset clock.
BULB COVER
WIRE
RETAINER