Maytag MGR5775QDB Use and Care Guide - Page 9
Oven Cooking - model
View all Maytag MGR5775QDB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Oven Cooking Control Panel A B C D E F G H I J The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions. Control panel shown includes model specific features. (Styling may vary depending on model.) A Broil B Bake C More+/Less- D Timer E Cook & Hold F Clean G Favorite H Clock I Keep Warm J CANCEL Use for broiling and top browning. Use for baking and roasting. Enters or changes time, oven temperature. Sets HI or LO broil. Sets Timer. Bakes for a preset time, then holds food warm for 1 hour. Use to set self-clean cycle. Use to set and save a specific Cook & Hold procedure. Use to set time-of-day clock. Use to keep cooked food warm in oven. Cancels all operations except Timer and Clock. Using the Touchpads • Press the desired pad. • Press More+ or Less- to enter time or temperature. • A beep will sound when any pad is touched. • A double beep will sound if a programming error occurs. Note: Four seconds after pressing the More+ or Lesspad, the time or temperature will automatically be entered. If more than 30 seconds elapse between touching a function pad and the More+ or Less- pad, the function will be canceled and the display will return to the previous display. Clock The clock can be set to display time in a 12-hour or 24-hour format. The clock is set at the factory for the 12-hour format. To change the clock to 24-hour format: 1. Press and hold the CANCEL and Favorite pads for three seconds. 2. Press the More+ or Less - pad to select 12 or 24 hour. 3. Set the time of day following the directions below. To set the Clock: 1. Press the Clock pad. • The colon flashes in the display. 2. Press More+ or Less- to set the time of day. • Colon continues flashing. 3. Press the Clock pad again or wait four seconds. The colon stops flashing. When electrical power is supplied or after a power interruption, the last clock time before power was interrupted will flash. To recall the time of day when another time function is showing, press the Clock pad. Clock time cannot be changed when the oven has been programmed for Delay Cook or Delay Clean or Cook & Hold. cont. 8