Maytag MGR7775 User Instructions - Page 12

Troubleshooting

Page 12 highlights

TROUBLESHOOTING First try the solutions suggested here or visit our website and reference Frequently Asked Questions (FAQs) to possibly avoid the cost of a service call. www.maytag.com Nothing will operate Surface burner makes popping noises • Is the burner wet? Let it dry. Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Is the power supply cord unplugged? Plug into a grounded 3 prong outlet. Household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician. Is the main or regulator gas shutoff valve in the off position? See Installation Instructions. Is the range properly connected to the gas supply? Contact a trained repair specialist or see Installation Instructions. Surface burners will not operate • Is the oven in self-clean? Surface burners will not operate during self-clean cycle. • Is the control knob set correctly? Push in knob before turning to a setting. • Is this the first time the surface burners have been used? Turn on any one of the surface burner knobs to release air from the gas lines. • Are the burner ports clogged? See "Sealed Surface Burners" section. Surface burner flames are uneven, yellow and/or noisy • Are the burner ports clogged? See "Sealed Surface Burners" section. On models with caps, are the burner caps positioned properly? See "Sealed Surface Burners" section. Is propane gas being used? The range may have been converted improperly. Contact a service technician or see cover for contact information. Gas range noises during Bake and Broil operations Noises that may be heard during the Bake and Broil operations: Whooshing, Poof, Clicking, Snaps, Pop These sounds are normal operational noises that can be heard each time the Bake or Broil burners ignite during the cycle. • A pop can be heard when the gas valve is opening or cycling on and will make a single pop when it snaps open from the solenoid. It sounds similar to a suction cup being pulled off of a piece of glass. The igniters will click several times until the flame is detected. These are short clicking sounds like tapping a nail onto a piece of glass. A whooshing or poof sound is heard when the Bake or Broil burner ignites. On some models, a clicking sound can be heard when the convection fan relay cycles on and off. Excessive heat around cookware on cooktop • Is the cookware the proper size? Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than 1/2"(1.3 cm) outside the cooking area. Cooktop cooking results not what expected • Is the proper cookware being used? Ideal cookware should have a flat bottom, straight sides and a well fitting lid, and the material should be of a medium to heavy thickness. Is the control knob set to the proper heat level? See "Cooktop Use" section. Is the range level? Level the range. See the Installation Instructions. Oven will not operate • Is this the first time the oven has been used? Turn on any one of the surface burner knobs to release air from the gas lines. • Is the electronic oven control set correctly? See "Electronic Oven Controls" section. Oven burner flames are yellow or noisy • Is propane gas being used? The range may have been converted improperly. Contact a service technician or see cover for contact information. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

TROUBLESHOOTING
First try the solutions suggested
here or visit our website
and reference
Frequently
Asked Questions
(FAQs)
to possibly avoid the cost of a service call.
www.maytag.com
Nothing will operate
Electrical
Shock Hazard
Plug into
a
grounded
3 prong
outlet.
Do
not
remove
ground prong.
Do
not
use
an adapter.
Do
not
use
an
extension
cord.
Failure
to follow
these
instructions
can
result
in
death,
fire, or
electrical
shock.
Is the power
supply cord unplugged?
Plug
into
a grounded
3 prong outlet.
Household
fuse
blown
or circuit breaker
tripped?
Replace the fuse or reset the circuit
breaker. If the problem
continues,
call an electrician.
Is the main or regulator
gas shutoff valve in the off
position?
See Installation
Instructions.
Is the range properly
connected
to the gas supply?
Contact
a trained repair specialist
or see Installation
Instructions.
Surface
burners
will not operate
Is the oven in self-clean?
Surface burners will not operate
during self-clean
cycle.
Is the control
knob set correctly?
Push in knob before turning
to a setting.
Is this the
first
time the surface burners
have been used?
Turn on any one of the surface burner knobs to release air from
the gas lines.
Are the burner ports clogged?
See "Sealed Surface Burners"
section.
Surface
burner
flames
are uneven,
yellow
and/or
noisy
Are the burner ports clogged?
See "Sealed Surface Burners"
section.
On models
with caps, are the burner caps positioned
properly?
See "Sealed Surface Burners"
section.
Is propane
gas being used?
The range may have been converted
improperly.
Contact
a
service technician
or see cover for contact
information.
Surface
burner
makes
popping
noises
Is the burner wet?
Let
it
dry.
Gas range
noises during
Bake
and
Broil operations
Noises that may be heard during the Bake and Broil operations:
Whooshing,
Poof, Clicking,
Snaps,
Pop
These sounds
are normal operational
noises that can be heard
each time the Bake or Broil burners
ignite during the cycle.
A pop can be heard when the gas valve is opening
or cycling
on and will make a single
pop when
it snaps open from the
solenoid.
It sounds
similar to a suction cup being pulled off of a
piece of glass.
The
igniters
will click several times until the flame is detected.
These are short clicking
sounds
like tapping
a nail onto a piece
of glass.
A whooshing
or poof sound
is heard when the Bake or Broil
burner
ignites.
On some models,
a clicking
sound
can be heard when the
convection
fan relay cycles
on and off.
Excessive
heat around
cookware
on cooktop
Is the cookware
the proper size?
Use cookware
about the same size as the surface cooking
area, element or surface
burner. Cookware
should
not extend
more than 1/2"(1.3 cm) outside the cooking
area.
Cooktop
cooking
results
not what
expected
Is the proper cookware
being used?
Ideal cookware
should have a flat bottom,
straight
sides and a
well fitting lid, and the material should be of a medium
to heavy
thickness.
Is the control
knob set to the proper heat level?
See "Cooktop
Use" section.
Is the range
level?
Level the range. See the Installation
Instructions.
Oven
will not operate
Is this the
first
time the oven has been used?
Turn on any one of the surface burner
knobs to release air from
the gas lines.
Is the
electronic
oven control
set correctly?
See "Electronic
Oven Controls"
section.
Oven
burner
flames
are
yellow
or noisy
Is propane
gas being used?
The range may have been converted
improperly.
Contact
a
service technician
or see cover for contact
information.
12