Maytag MGR7775 User Instructions - Page 6

Cooktop

Get Maytag MGR7775 - 30 in. Ing Gas Range PDF manuals and user guides
UPC - 883049187068
View all Maytag MGR7775 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

COOKTOP USE Fire Hazard Do not let the burner flame extend beyond the edge of the pan. Turn off all controls when not cooking. Failure to follow these instructions can result in death or fire. Electric igniters automatically light the surface burners when control knobs are turned to IGNITE. Before setting a control knob, place filled cookware on the grate. Do not operate a burner using empty cookware or without cookware on the grate. To Set: 1. Push in and turn knob counterclockwise to IGNITE. All 4 surface burners will click. Only the burner with the control knob turned to IGNITE will produce a flame. 2. Turn knob to anywhere between HIGH and LOW. REMEMBER: When range is in use or (on some models) during the Self-Cleaning cycle, the entire cooktop area may become hot. A. Burner cap B. Burner base C. Alignment pins D. Igniter E. Gas tube opening IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges. Burner cap: Always keep the burner cap in place when using a surface burner. A clean burner cap will help avoid poor ignition and uneven flames. Always clean the burner cap after a spillover and routinely remove and clean the caps according to the "General Cleaning" section. Gas tube opening: Gas must flow freely throughout the gas tube opening for the burner to light properly. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the gas tube opening. Keep spillovers out of the gas tube by always using a burner cap. Power Failure In case of prolonged power failure, the surface burners can be lit manually. Hold a lit match near a burner and turn knob counterclockwise to IGNITE. After burner lights, turn knob to setting. B A. 1-11/_'' (25-38 mm) B. Burner ports Burner ports: Check burner flames occasionally for proper size and shape as shown above. A good flame is blue in color, not yellow. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the burner ports.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
COOKTOP
USE
Fire Hazard
Do not let the burner
flame
extend
beyond the edge of
the pan.
Turn off all controls
when not cooking.
Failure to
follow
these
instructions
can result in death
or
fire.
Electric
igniters
automatically
light the surface burners when
control
knobs are turned to IGNITE.
Before setting
a control
knob, place filled cookware
on the grate.
Do not operate
a burner using empty cookware
or without
cookware
on the grate.
To Set:
1.
Push
in
and turn knob counterclockwise
to IGNITE.
All 4 surface burners
will click. Only the burner with the control
knob turned to IGNITE will produce
a flame.
2.
Turn knob to anywhere
between
HIGH and LOW.
REMEMBER:
When range is in use or (on some models)
during the Self-Cleaning
cycle, the entire cooktop
area may
become
hot.
A. Burner
cap
B. Burner base
C. Alignment
pins
D. Igniter
E. Gas tube opening
IMPORTANT:
Do not obstruct
the flow
of combustion
and
ventilation
air around the burner
grate edges.
Burner
cap: Always
keep the burner cap in place when using a
surface burner. A clean burner cap will help avoid
poor ignition and
uneven flames. Always clean the burner cap after a spillover and
routinely remove and clean the caps according
to the "General
Cleaning"
section.
Gas
tube opening:
Gas must flow freely throughout
the gas tube
opening for the burner to light properly.
Keep this area free of soil
and do not allow spills, food,
cleaning agents
or any other material
to enter the gas tube opening.
Keep spillovers
out of the gas tube
by always using a burner cap.
Power Failure
In case of prolonged
power failure, the surface burners
can be lit
manually. Hold a lit match near a burner
and turn knob
counterclockwise
to IGNITE. After burner
lights, turn knob to
setting.
B
A. 1-11/_
''
(25-38 mm)
B. Burner ports
Burner
ports:
Check burner flames occasionally
for proper size
and shape as shown
above. A good flame is blue in color, not
yellow.
Keep this area free of soil and do not allow spills, food,
cleaning
agents or any other material to enter the burner
ports.