Maytag MHW3000BW Use & Care Guide - Page 4

CONTROL PANEL AND FEATURES Not all features and cycles are available on all models. NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are registered, touch the control panel with your finger tip, not your fingernail. When selecting a setting or option, simply touch its name. Model MHW4000 4 5 2 1 Model MHW3000 1 3 4 4 5 2 6 7 A B C D 6 7 A D 3 4 1 POWER/CANCEL Touch to turn the washer on and off. Touch to stop/cancel a cycle at any time. 2 WASH CYCLE KNOB Use your Wash Cycle knob to select available cycles on your washer. Turn the knob to select a cycle for your laundry load. See "Cycle Guide" for detailed descriptions of cycles. 3 START Touch and hold until the light above START comes on to start a cycle, or touch once while a cycle is in process to pause it. If you want to add a garment, you can touch START when the "Add a Garment" LED is on. 4 LED DISPLAY AND SETTINGS When you select a cycle, its default settings will light up and the Estimated Cycle Time will be displayed (for times longer than 99 minutes, hours will be displayed, followed by minutes). Factors such as load size, wash temperature, and water pressure may affect the time shown in the display during the cycle. Tightly packing garments, unbalanced loads, or excessive suds may cause the washer to adjust the cycle time, as well. Touch the desired option along the right of the display to adjust settings. See "Cycle Guide" for available settings on each cycle. Not all settings are available with all cycles. 4 Temperature The recommended wash temperature is preset for each cycle. You may also select a wash temperature based on the type of fabric and soils being washed. For best results, follow the garment label instructions. All wash temperatures feature a cold rinse. Soil Level The Soil Level setting (wash time) is preset for each wash cycle. For most loads, use this preset soil level. When you change the soil setting, the cycle time will increase or decrease in the Estimated Cycle Time display. For heavily soiled and sturdy fabrics, use the Soil Level setting to select more wash time. For lightly soiled and delicate fabrics, use the Soil Level setting to select less wash time. Lower soil level settings will help reduce tangling and wrinkling. Spin Speed This washer automatically selects the spin speed based on the cycle selected. Some preset speeds can be changed. • H igher spin speeds mean shorter dry times, but may increase wrinkling in your load. • L ower spin speeds reduce wrinkling, but will leave your load more damp. 5 DELAY START Use + and - to delay the start of the wash cycle by up to 9 hours. To turn off Delay Start, use + and - to set the delay time to "0," or touch POWER/CANCEL.