Maytag MHWE200XW Owners Manual - Page 13
Changing Cycles and Options, Status Lights - washing machine
UPC - 883049191997
View all Maytag MHWE200XW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Changing Cycles and Options Not all Options are available with all Cycles. Cycles and Options can be changed anytime before START/PAUSE is pressed. To cancel a cycle 1. Press POWER/CANCEL. 2. The washer powers down, the door unlocks, and clothes can be removed. NOTE: If the water level or the temperature is too high, the washer will drain automatically before the door unlocks. To change Options after the cycle has started 1. Press START/PAUSE once. 2. Press the desired OPTIONS. If the option is not available, the machine will beep. 3. Press and hold START/PAUSE (for approximately 1 second) to continue the cycle. NOTE: Press and hold FRESH SPIN™ option button (approx. 1 second) to add periodic tumbling. See "Options" for complete cycle description. The light will glow when selected and will remain flashing for up to 6 hours or until the washer is stopped by either pressing POWER/CANCEL or opening the door. To drain the washer manually 1. Press START/PAUSE. 2. Press RINSE, DRAIN & SPIN. 3. Deselect 2ND RINSE Option. 4. Press and hold START/PAUSE (for approximately 1 second) to begin the drain. 5. When the spin is complete, the door unlocks. Items can be removed from the washer. Status Lights These lights show which portion of the cycle the washer is operating. They also indicate when you can add an additional item to the wash cycle and when the controls are locked. Done The Done light comes on after the cycle is complete. The light will stay on until door is opened. Controls Locked Lock/Unlock Controls This feature avoids unintended use of the washer and cycle or option changes during a cycle. When this light is illuminated, all buttons are disabled except for START/PAUSE and POWER/ CANCEL. You can lock the controls while the washer is in operation. To lock the controls Press and hold CYCLE SIGNAL option for 3 seconds. The Controls Locked status light illuminates. To unlock the controls Press and hold CYCLE SIGNAL option for 3 seconds until the CONTROLS LOCKED Status light turns off. Door Locked Depending on the stage of the wash cycle, the door locks and unlocks automatically. The status light indicates when the door is locked. To unlock, press START/PAUSE. Add Clothes You can add items to the washer after the wash cycle has started, if the Add Clothes status light is illuminated. All cycles have this feature except Rinse, Drain & Spin and Clean Washer with AFFRESH™ cycle. To add items 1. Press START/PAUSE. The washer door unlocks, and items can be added. 2. To continue the cycle, close the door and press and hold START/PAUSE (for approximately 1 second). NOTE: To add garments after the Add Clothes period is over, the wash cycle needs to be canceled, the items added, and a new wash cycle started. 13
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52