Maytag MSD2650HEB Use and Care Guide - Page 5

Installation Note • For refrigerators in operation, shut off water before removing water line from the door. To Disconnect the Water Line: • Push in white collar (A) and hold. • Pull the door-side tube from the connector (B]. To Reconnect the Water Line: • Firmly push tube 5/8"into the connector. Use lines on the tube as a guide for full insertion. • If tube end is damaged, cut off %" before reconnecting. • If leaking occurs, reconnect the line. 6. For ice and water dispensing models only: Detach main wire connector harness and red wire harness. harness, use a flat blade _ tool or fingernail to press , jTuoncdteiotnach pominat inbewtwireeen two connectors to release. , To detach red wire harness, press tab on underside of connector to release. 7. Remove top hinges along with doors. 3. Close doors. 4. Remove top hinge covers by removing Phillips screws. 5. Unscrew F,8" hex head screws from top hinges. For water dispensing models only: • Do not remove screw connecting green ground wire. 8. Remove bottom hinges with a %" hex head driver. Replacing the Doors • To replace the doors, follow the steps in Door and Hinge Removal in reverse order. IMPORTANT: If water line tube end is damaged, cut off 5/8"before reconnecting.