Maytag MTUC7500ADM Use & Care Guide - Page 13
Cleaning Inside the Cabinet, Cleaning the Ram, Cleaning Before a Vacation, rollers onto the tracks.
View all Maytag MTUC7500ADM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Cleaning Inside the Cabinet NOTE: You may want to wear gloves since there may be bits of glass in the cabinet. 1. Pull the drawer out until it stops. NOTE: Look to see how the drawer rollers move in the tracks. It will be easier to replace the drawer after you have finished cleaning. Cleaning the Ram NOTE: You may want to wear gloves since there may be bits of glass on the ram cover. 1. Wipe glass particles off of the ram cover with a cloth or paper towels. 2. Remove foods with a clean sponge or soft cloth and a mild detergent in warm water. Rinse and dry thoroughly with a soft cloth. 2. Lift the front of the drawer to clear the stops. 3. Grasp the drawer on the sides and pull it out the rest of the way. Set the drawer down gently. Cleaning Before a Vacation If you will be away for more than a couple of days, remove the compactor bag. Remove the Key-Knob (or Key-Switch) and store it out of children's reach. 4. Vacuum the inside of the cabinet. Liquid spills or wet trash should be cleaned up by hand, or by using a vacuum designed to pick up liquids. 5. Wash the inside of the cabinet with a clean sponge or soft cloth and a mild detergent in warm water. Rinse and dry thoroughly with a soft cloth. 6. To replace the drawer, grasp it by the sides and insert the rollers onto the tracks. 7. Lift the front of the drawer and push it in fully past the stops. 13