Maytag MTUC7500ADM Use & Care Guide - Page 8
Installation, Custom Panel without Handle, Dimensions, A. Mounting screws, B. Foot pedal, A. Handle
View all Maytag MTUC7500ADM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installation 1. Remove the mounting screws attaching the foot pedal to the compactor. Remove foot pedal. A Custom Panel without Handle Dimensions Use these dimension drawings to create a custom panel for use without a trim kit. The panel should be ¹⁄₂" (1.3 cm) min. thick. A 25" B (63.5 cm) A. Mounting screws B. Foot pedal 2. Remove mounting screws attaching the toe guard to the compactor. Remove toe guard. 3. Remove the mounting screws attaching the decorative panel to the compactor. Remove decorative panel and discard mounting screws. 4. Align the bottom of the custom panel with the bottom of the drawer front. 5. Secure the panel from the back using four #8 x 1" wood screws as shown. 6. Reinstall the toe guard using the existing screws and ¹⁄₂" washer. Then, reinstall the foot pedal. 15" (38.1 cm) Installation 1. Remove the mounting screws attaching the foot pedal to the compactor. Remove foot pedal. A A B C C D E F A. Handle B. Custom panel C. Panel screw locations D. Toe guard E. Washer F. Toe guard screw A B A. Mounting screws B. Foot pedal 2. Remove mounting screws attaching the toe guard to the compactor. Remove toe guard. 3. Remove the mounting screws attaching the decorative panel to the compactor. Remove decorative panel and discard mounting screws. 4. Align the bottom of the custom panel with the bottom of the drawer front. 5. Secure the panel from the back using 4 - #8 x 1" wood screws as shown. 8