Maytag MVWC700VW Installation Instructions - Page 5
with the shipping - washers
 |
View all Maytag MVWC700VW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Straight power cord 1. Remove power plug and yellow strap from machine base to release the rear beveling system. Looped power cord I 2. Firmly grasp the power cord and pull to completely remove the power cord, cord restraint, and pin from the rear panel. Looped power cord 1. Firmly grasp the yellow shipping strap and pull until both ends are completely removed from washer. 3. Confirm that the power cord restraint (A) and pin (B) are removed. U 2. Check that two (2) cotter pins were removed with the shipping strap. A. Power cord restraint B. Pin
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
-
13
-
14
-
15
-
16
 |
 |
1.
2.
3.
Straight power
cord
Remove power plug and yellow strap from machine base
to release the rear beveling system.
I
Firmly grasp the power cord and pull to completely
remove
the power cord, cord restraint, and pin from the rear panel.
Confirm that the power cord restraint (A) and pin (B)
are removed.
Looped
power
cord
1.
2.
Looped
power
cord
Firmly grasp the yellow shipping strap and pull until both ends
are completely
removed
from washer.
U
Check that two (2) cotter
pins were removed
with the shipping
strap.
A. Power cord restraint
B. Pin