Meade TE346W User Manual - Page 9

SEARCH FOR REMOTE SENSORS • The main unit can be manually activated to search for the signals from remote sensors by pressing and holding DOWN (? ) button. OPERATION • To select the indoor/ outdoor temperature mode, press UP (? ) or DOWN (? ) until the icon flashes with a beep sound alert. VIEWING REMOTE (CHANNEL) TEMPERATURE Static Display: • Press the CHANNEL button to select measurements from different remote sensors, each is MODE to a unique channel 1, 2 or 3. Channel Auto-Scan Display: • To enable an automatic scan of all channels, press and hold CHANNEL, until the icon is displayed. The measurements from each remote channel will be alternately displayed with a 5 seconds viewing. NOTE: the channel auto-scan feature can be active only if there are more than one remote sensors operating and are set to different channels. PROGRAMMING TEMPERATURE IN CELSIUS OR FAHRENHEIT • Press and hold MODE button for 3 seconds to toggle the temperature unit in Celsius (ºC) or Fahrenheit (ºF). SETTING TEMPERATURE ALARM • Press down button to select temperature display. • Press ALARM button selecting the desired alarm, the upper temperature alert with icon (if disabled, displays OFF), or lower temperature alert with icon (if disabled, displays OFF). • Press and hold ALARM button until the temperature digits flashing. • Adjust the temperature digits using the UP (? ) or DOWN (? ). Press and hold either button for fast digits advance • Press the ALARM to confirm selection and return to the temperature alarm selection screen ACTIVATING OR DEACTIVATING TEMPERATURE ALARMS • Once the above alerts are displayed, press the UP (? ) or DOWN (? ) to enable or disable the corresponding alert. VIEWING MAXIMUM AND MINIMUM READINNGS Press the MEM button recalling: • Current temperature and humidity • Minimum temperature and humidity • Maximum temperature and humidity RESETTING TEMPERATURE MEMORIES Press and hold MEM button for 3 seconds to clear all channel memories. 9