Memorex Mi2001 User Guide - Page 6

Power Source - specs

Get Memorex Mi2001 PDF manuals and user guides
UPC - 749720010738
View all Memorex Mi2001 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

POWER SOURCE AC CONNECTION Insert the small end of the AC adapter into the DC IN 15V jack (located on the rear of the unit). Connect the other end to a wall outlet having 120V AC, 60 Hz. AC Adapter, DC 15V Z NOTES: • Remove both the DC plug and the AC- IN plug to disconnect the AC adapter when not in use. To DC 5V IN Jack • Only use the supplied AC adapter which has the following specs: DC 15V Z BATTERY INSTALLATION Two (2) "AAA" size batteries can be used to provide a backup for the clock and alarm time for this unit as follows: 1. Open the battery door by pushing in on the tab, then removing the door. 2. Insert two (2) "AAA" batteries as shown. Alkaline batteries are recommended for the longest playing time. 3. Place the battery door back on the compartment. NOTES: • The batteries are used to back-up the clock and alarm times when the AC adapter is disconnected or there is a power failure. • The battery indicator will blink in the display when there are no batteries or the batteries are low and need replacing. IMPORTANT! See BATTERY PRECAUTIONS on the next page. 5 Downloaded from www.Manualslib.com manuals search engine

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
5
POWER SOURCE
AC CONNECTION
Insert the small end of the AC adapter into
the DC IN 15V jack (located on the rear of
the unit). Connect the other end to a wall
outlet having 120V AC, 60 Hz.
AC Adapter, DC 15V
Z
NOTES:
•
Remove both the DC plug and the AC-
IN plug to disconnect the AC adapter
when not in use.
•
Only use the supplied AC adapter which has the following specs: DC 15V
Z
To DC 5V IN Jack
Two (2) “AAA” size batteries can be used to
provide a backup for the clock and alarm time for
this unit as follows:
1.
Open the battery door by pushing in on the
tab, then removing the door.
2.
Insert two (2) “AAA” batteries as shown.
Alkaline batteries are recommended for the
longest playing time.
3.
Place
the
battery
door
back
on
the compartment.
NOTES:
•
The batteries are used to back-up the clock and alarm times when the AC
adapter is disconnected or there is a power failure.
•
The battery indicator will blink in the display when there are no batteries or the
batteries are low and need replacing.
IMPORTANT!
See BATTERY PRECAUTIONS on the next page.
BATTERY INSTALLATION
Downloaded from
www.Manualslib.com
manuals search engine