Metabo BS 18 LTX BL Impuls Operating Instructions - Page 5
Overview, Commissioning, Fault, Repairs, Environmental Protection, Technical Specifications
View all Metabo BS 18 LTX BL Impuls manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Children should be supervised to ensure that they do not play with the tool. Keep children away from the battery charger and the working area! Keep your battery charger out of reach of children! Do not insert objects into the ventilation slots on the battery charger - there is a danger of electric shocks and short circuits! Do not use faulty battery packs. SYMBOLS: Class II Construction V Volts Hz Hertz ~A Amperes Alternating Current ENGLISH en 6.2 Conservation charge Once the charging process has finished, the battery charger automatically switches to conservation mode. The battery pack can remain in the battery charger and is therefore always ready for use. The operating display (3) lights up continuously. 7. Fault 7.1 Warning display (4) lights up continuously 4. Overview See page 2. 1 Battery pack (not in scope of delivery) 2 Sliding seat 3 Operation display 4 Warning display Battery pack is not charged. Temperature too high/ too low. When the temperature of the battery pack is between 0 °C and 50 °C, the charging process begins automatically. 7.2 Warning display (4) flashes 5. Commissioning Before plugging in, check to see that the rated mains voltage and mains frequency, as specified on the rating label, match your power supply. Devices such as this one, which generate direct current, may have an effect on basic residualcurrent circuit breakers. Use type F or better, with a release current of max. 30 mA. Before commissioning the charger, ensure that the air slots are free. Minimum distance to other objects is 5 cm. 5.1 Self-test Insert mains supply plug. The warning display (4) and the operating indicator (3) light up one after the other for approx. 1 second and the installed fan runs for approx. 5 seconds. 6. Use 6.1 Charging battery pack Push the battery pack completely to the stop on the sliding seat (2). The operating indicator (3) flashes. Note: To have the charge level displayed on Li-ion battery packs (with 14.4 V, 18 V and 36 V), first take the battery pack out of the charger and then press the button on the battery pack. • Battery pack is defective. Remove the battery pack immediately from the charger. • The battery pack was not pushed correctly onto the sliding seat (2). See section 6.1. 8. Repairs Repairs to the charger must only be carried out by qualified electricians. If the mains connection cable of this tool is damaged, in order to prevent endangering personnel and property it must be replaced by the manufacturer, or the Customer Service of the manufacturer, or a similarly qualified person. Contact your local Metabo representative if you have Metabo chargers requiring repairs. For addresses see www.metabo.com. 9. Environmental Protection Observe national regulations on environmentally compatible disposal and on the recycling of disused machines, packaging and accessories. Only for EU countries: Never dispose of power tools in your household waste! In accordance with European Guideline 2002/ 96/EC on used electronic and electric equipment and its implementation in national legal systems, used power tools must be collected separately and handed in for environmentally compatible recycling. 10. Technical Specifications See page 3. U = Voltage ranges of the battery packs C = Battery pack capacity 5