Miele Blizzard CX1 PureSuction PowerLine Operating instructions/Installation i - Page 16

en-US  Press the foot switch . If the suction power of the adjustable floorhead seems too high, reduce the suction until the floorhead is easier to maneuver (see "Use" - "Regulating the suction power"). Using the accessories supplied (Fig. 09)  Crevice nozzle For cleaning folds, crevices or corners.  Upholstery nozzle For cleaning upholstery, mattresses, cushions, curtains, etc.  Dusting brush with natural bristles, supplied loose (depending on model) For cleaning base boards and as ornate, carved and particularly delicate objects. The head can be swiveled to the best angle. The crevice nozzle and the upholstery nozzle are located in holders at the back of the vacuum cleaner. The standard versions of certain models include a turbobrush that is not illustrated. The turbobrush is supplied with its own set of operating instructions.  Press the release button on the dusting brush and push the brush out until it clearly engages in position.  When you have finished dusting press the release button and push the brush back into its original position until it clicks into place. Reversible floorhead (Fig. 11) (included as standard depending on model) For general use and also for vacuuming the stairs.  For safety reasons when vacu- uming stairs, it is best to start at the bottom of the stairs and move upwards. Floorbrush Parquet Twister with swiveling head (SBB 300-3) (included as standard depending on model) This brush is suitable for a variety of hard floor surfaces and has a swivel joint enabling it to get into awkward corners. Dusting brush integrated in the Eco Comfort handle (Fig. 10) Some models are equipped with an Eco Comfort handle. The dusting brush is suitable for vacuuming scratch-resistant surfaces such as keyboards and for vacuuming up crumbs. 16