Miele Blizzard CX1 PureSuction PowerLine Operating instructions/Installation i - Page 23
Frequently asked questions, Customer Service
View all Miele Blizzard CX1 PureSuction PowerLine manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
en-US Frequently asked questions Shake the water out of the opening. Always switch off the vacuum cleaner before attempting to rectify a fault and unplug it. Cleaning the pre-filter (Figs. 31 + 32) The pre-filter is located at the rear of the vacuum cleaner. This should be cleaned if it is obviously dirty. Remove the dust container. Release the handle of the pre-filter and remove the pre-filter. Rinse the pre-filter under cold running water. Release the top so that the marking is pointing to the symbol. Carefully lift the fine dust filter up and out of the fine dust container. Clean the outside of the fine dust filter under cold running water. Do not clean the inside of the fine dust filter. Do not use detergent. Do not use any sharp or pointed objects and do not brush the fine dust filter. After cleaning, allow the fine dust filter to dry for a minimum of 24 hours. Do not use detergent! Do not use any sharp or pointed objects! Dry the pre-filter carefully! Replace the dry filter in the dust container and lock the handle. Reinsert the dust container in the vacuum cleaner. Cleaning the fine dust filter manually (Fig. 33-38) Allow a drying time of 24 hours. Remove the dust container. Release the fine dust container in the direction of the arrow and remove it. Run a little water into the opening at the top of the fine dust container. Gently shake the fine dust container back and forth. Clean the fine dust container with water and mild detergent. Dry the fine dust container carefully. Insert the dry fine dust filter into the dry fine dust container so that the marking is pointing to the symbol. Lock the top into place so that the marking is pointing to the symbol. Reinsert the fine dust container in the vacuum cleaner and lock it into place. Reinsert the dust container in the vacuum cleaner. Customer Service Contact in case of fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Service. This will rinse out the dust. 23