Miele Blizzard CX1 PureSuction PowerLine Operating instructions/Installation i - Page 19
uum cleaner lights up yellow.
View all Miele Blizzard CX1 PureSuction PowerLine manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
en-US The contents of the dust compartment can be disposed of with the normal household trash, providing it contains general household dust only. Hold the dust container close to the trash can so that as little dust billows out as possible. Press the yellow release button on the bottom of the dust container. The flap will open and the dust will fall out. Close the flap firmly. It should click into place. Insert the dust container down into the vacuum cleaner so that it audibly clicks into place. Push the handle down. Cleaning the dust container Clean the dust container as required. Clean the dust container using water and liquid dish soap. Dry the dust container carefully. Cleaning the filter frame (Figs. 25 + 26) A removable filter frame is located in the dust container. This should be cleaned if it is obviously dirty. Place the emptied and open dust container on its front. Release the filter frame and remove it. Empty the filter frame and rinse it under cold running water. Do not use detergent! Do not use any sharp or pointed objects! Dry the filter frame carefully! Place the dry filter frame in the dust container so that it audibly clicks into place. Cleaning the fine dust filter The fine dust filter is equipped with a self-cleaning function. When a specified degree of soiling is reached, the vacuum cleaner switches off automatically for approx. 20 seconds and carries out a cleaning process. You will hear this process running. The ComfortClean button on the vacuum cleaner lights up yellow. Starting the ComfortClean self-cleaning function manually (Fig. 27) If you are vacuuming a large amount of dust at once, the ComfortClean selfcleaning function should be started manually either during a vacuuming pause or immediately afterward. This enables the vacuum cleaner to achieve the very best cleaning performance again right away. With the vacuum cleaner switched on, press the ComfortClean button for at least two seconds. The vacuum cleaner is switched off automatically for approx. 20 seconds and a cleaning process is carried out which results in operational noise. The ComfortClean button on the vacuum cleaner lights up yellow. The vacuum cleaner will then switch back on automatically and will operate with the previously selected setting. 19