Miele CVA 4062 BRWS Operating and Installation manual - Page 42
Milk pipework, Rinsing the milk pipework, after use, at the end of each, day milk was used
View all Miele CVA 4062 BRWS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Cleaning and care Milk pipework Rinsing the milk pipework To prevent the milk residue from spoiling or drying in the machine and pipework, you should rinse these lines after use. In addition to rinsing after use, the lines need to be cleaned at the end of the day. Maintenance q r HI J L n mC ^ Tap < or > until "Maintenance m" is highlighted, confirm with OK. ^ Select "Rinse milk pipework", confirm with OK. ^ Select "Start", confirm with OK. Cleaning the milk pipework To prevent milk residue from spoiling or drying in the machine and pipework, it should be cleaned at the end of each day milk was used to make a beverage. ^ If the milk pipework in the lid is clogged, clean under running water using the cleaning brush. Insert the cleaning brush into the pipework, and push it in and out. Maintenance q r HI J L n mC ^ Tap < or > until "Maintenance m" is highlighted, confirm with OK. ^ Select "Clean milk pipework", confirm with OK. ^ Select "Start", confirm with OK. Follow the instructions in the display. ^ Follow the instructions in the display. To rinse the pipework in the lid of the stainless-steel milk container, fill the large cleaning container to the "max." mark with cold water. Fit the lid of the stainless-steel milk container into place on the large cleaning container. Hang the cleaning container in the appliance where the milk container would normally sit. 42