Miele CVA 4062 BRWS Operating and Installation manual - Page 58
feature is set to On., Instead of coffee only water is dispensed.
View all Miele CVA 4062 BRWS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Frequently asked questions Instead of coffee only water is dispensed. Possible fault Solution - The beans may have gotten stuck. - The ground coffee funnel cover was opened and closed and a preparation with ground coffee was selected but no ground coffee was inserted. The coffee system switches automatically back to bean use after preparation. - Pull the bean container out and push it back in. The drip tray is empty but a message to empty it is displayed. Possible fault Solution - The metal contacts are soiled or wet. - Clean and dry the contacts. - Check if the drip tray is inserted correctly. - Insert the drip tray as described in "Cleaning and Care - Drip tray". - Turn the machine off and on again with the main switch. - If the message still appears contact Technical Service. The machine does not rinse when turned on although the automatic rinse feature is set to "On". When the machine is still at a temperature of about 140°F (60°C). The machine will not rinse when it is too hot. The water (or milk) dispensing stops when programming the serving size. Possible fault Solution - There was not enough water in the - Fill the water tank or milk container tank or milk in the milk container. The before programming the serving dispensed amount will not be saved. size. - If the maximum amount is dispensed, the flow stops automatically. The maximum amount is saved. 58