Miele CVA 4062 BRWS Operating and Installation manual - Page 59

the unit performs less?, Water is in the waste unit.

Get Miele CVA 4062 BRWS PDF manuals and user guides View all Miele CVA 4062 BRWS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

Frequently asked questions Water is in the waste unit. Possible fault Solution This is not a fault. This is residual water from the cleaning process. "Coffee water" is in the waste unit. Possible fault Solution If the grind setting is too coarse, this can result in too much coffee water in the waste unit. Adjust the grind setting and/or amount of coffee. The descaling process was started accidently. The descaling process cannot be canceled once it is started. The process needs now to be completed. This is a safety feature to ensure the process will be completed. It is important for best results and the longevity of the machine. See "Descaling". The machine makes loud noises during descaling During a descaling cycle, the machine is relatively loud because water is being forced through the lines at high pressure. This is not a fault. The preheating time is increased, the water flow amount is not correct and the unit performs less? Possible fault Solution The machine needs to be descaled. See "Descaling the appliance". No water flows from the main dispenser. Possible fault Solution The filters in the brew unit are clogged. Rub any residue off the filters with a sponge. See "Cleaning and Care". The brew unit or waste unit could not be pulled from the machine. Possible fault Solution - The brew unit is not in the correct position. - The door was opened during grinding or brewing. - Close the door. The brew unit automatically gets into the correct position. 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Water is in the waste unit.
Possible fault
Solution
This is not a fault.
This is residual water from the cleaning
process.
"Coffee water" is in the waste unit.
Possible fault
Solution
If the grind setting is too coarse, this
can result in too much coffee water in
the waste unit.
Adjust the grind setting and/or amount
of coffee.
The descaling process was started accidently.
The descaling process cannot be canceled once it is started. The process
needs now to be completed. This is a safety feature to ensure the process will be
completed. It is important for best results and the longevity of the machine.
See "Descaling".
The machine makes loud noises during descaling
During a descaling cycle, the machine is relatively loud because water is being
forced through the lines at high pressure. This is not a fault.
The preheating time is increased, the water flow amount is not correct and
the unit performs less?
Possible fault
Solution
The machine needs to be descaled.
See "Descaling the appliance".
No water flows from the main dispenser.
Possible fault
Solution
The filters in the brew unit are clogged.
Rub any residue off the filters with a
sponge. See "Cleaning and Care".
The brew unit or waste unit could not be pulled from the machine.
Possible fault
Solution
– The brew unit is not in the correct
position.
– The door was opened during
grinding or brewing.
– Close the door. The brew unit
automatically gets into the correct
position.
Frequently asked questions
59