Miele DA 249 Operating manual - Page 16
Reprogramming the charcoal filter, timer, preset
View all Miele DA 249 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Operation Reprogramming the charcoal filter timer The active charcoal filter can only be used in recirculation mode and can not be used to exhaust fumes. The charcoal filter timer is not preset. Before using the hood in recirculation mode, the charcoal filter timer must be programmed. ^ Turn off the fan using the On/Off button. The indicator for the charcoal filter and one of the "-/+" indicators will flash. The lit indicator shows the programmed time: 1st indicator from the left = 120 hours 2nd indicator from the left = 180 hours 3rd indicator from the left = 240 hours 4th indicator from the left = deactivated ^ Use the "-/+" button to select the desired time. ^ Press the Delayed Shut Down and Charcoal Filter buttons at the same time. ^ Store the selection by pressing the charcoal filter button. If the procedure is not stored within 4 minutes of programming, the hood will automatically default to the "old" data. 16