Miele DA 249 Operating manual - Page 33

Upper retaining plate, reducing collar

Get Miele DA 249 PDF manuals and user guides View all Miele DA 249 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Installation a 2 protective shields prevent scratches to the chimney during installation. b 1 vent collar for use with 6" (150 mm) exhaust ducting c 1 reducing collar for use with 5" (125 mm) exhaust ducting. d Upper retaining plate secures the chimney extension. e Middle retaining plate for additional stability of the chimney. f Lower retaining plate secures the canopy and motor assembly. g Installation kit for recirculation mode contains diverter, 2 grilles, a hose and hose clips (optional accessory) ,CAUTION To avoid risk of hand or other injury, avoid contact with sharp edges during the assembly and installation process. 8 large headed screws 5 x 40 mm for securing the retaining plates and the canopy. (S8 wall anchors included in the packaging are not for use in USA / CDN.) 2 M 6 locking nuts for securing the motor assembly. 2 screws 3.9 x 7.5 mm for securing the chimney. 2 screws M4 with locking nuts and plastic washers for securing the glass canopy. 1 screw cover Installation instruction diagram 1 lever for disassembling the chimney 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
a
2 protective shields
prevent scratches to the chimney
during installation.
b
1 vent collar
for use with 6" (150 mm) exhaust
ducting
c
1 reducing collar
for use with 5" (125 mm) exhaust
ducting.
d
Upper retaining plate
secures the
chimney extension.
e
Middle retaining plate
for additional
stability of the chimney.
f
Lower retaining plate
secures the
canopy and motor assembly.
g
Installation kit
for recirculation
mode contains diverter, 2 grilles, a
hose and hose clips (optional
accessory)
,
CAUTION
To avoid risk of hand or other injury,
avoid contact with sharp edges
during the assembly and installation
process.
Installation instruction diagram
8 large headed screws 5 x 40 mm
for securing the retaining plates and the
canopy.
(S8 wall anchors included in the
packaging are not for use in USA / CDN.)
2 M 6 locking nuts
for securing the
motor assembly.
2 screws 3.9 x 7.5 mm
for securing the
chimney.
2 screws M4
with locking nuts and
plastic washers for securing the glass
canopy.
1 screw cover
1 lever
for disassembling the chimney
Installation
33