Miele K 1911 Vi Operating and Installation manual - Page 52
Sliding the appliance into the installation space 52, together. See the Installation Manual
View all Miele K 1911 Vi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Installing the appliance Sliding the appliance into the installation space If a side-by-side installation is desired, connect the two appliances together. See the Installation Manual included with the "Merging Kit". ^ Plug the appliance into the power outlet b. The plug of the appliance should be easily accessible after installation. If the plug is not accessible after the appliance has been installed, disconnection from the power supply should be completed via the circuit breaker. ^ Unscrew the plinth. ^ To protect the corners of the installation space, attach the supplied edge protector a on both sides with adhesive tape. 52 In the case of side-by-side installations, a separate outlet must be used for each appliance. ^ To prevent the power cord from becoming caught: Tie a piece of string to the middle of the power cord and feed it forward under the appliance. When sliding the appliance in, pull the cable forward c. ^ Carefully slide the appliance into the space until the height-adjustable wheels interlock with the anti-tip brackets d. If resistance is felt when attempting to slide the appliance into the installation niche - for example, because the floor is uneven, ^ Turn the rear adjustable wheels slightly outward (see "Aligning the appliance"), then push the appliance in. Be careful not to damage the power cord attached to the floor. ^ Remove the edge protector a.