Miele KM 5773 Operating and Installation manual - Page 23

Booster function 23

Get Miele KM 5773 PDF manuals and user guides View all Miele KM 5773 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Use Booster function Each burner is equipped with a booster function to temporarily increase the power level. When the booster function is on, the burners increase to power level 12 for 10 minutes. This boost is intended for quickly bringing large quantities of water to the boil, e.g. cooking pasta. A maximum of 3 booster functions can be used at a time. If the booster is activated, when - no power setting is selected, the burner will revert to power level 12 at the end of the booster time or when the booster is switched off. - a power setting is selected, the burner will revert to this pre-selected power setting at the end of the booster time or when the booster is switched off. Taking a pan off the burner while the booster is in operation interrupts the booster function. It will resume if a pan is placed back on the burner within 3 minutes. The booster can be switched off by touching the - sensor. The extra boost of energy is only available by taking a proportion of energy away from another burner. For this reason, the burners are networked in pairs as shown. When the booster is activated: - if Auto-heat is activated or either burner of the same network, it will switch off. - the power level on the other linked burner may decrease. The original and reduced power levels blink back and forth until the Booster turns off. The reduced power level is also represented by the number of segments in the lighting circle. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Booster function
Each burner is equipped with a booster
function to temporarily increase the
power level. When the booster function
is on, the burners increase to power
level
12
for 10 minutes. This boost is
intended for quickly bringing large
quantities of water to the boil,
e.g. cooking pasta.
A maximum of 3 booster functions can
be used at a time.
If the booster is activated, when
– no power setting is selected, the
burner will revert to power level 12 at
the end of the booster time or when
the booster is switched off.
– a power setting is selected, the
burner will revert to this pre-selected
power setting at the end of the
booster time or when the booster is
switched off.
Taking a pan off the burner while the
booster is in operation interrupts the
booster function. It will resume if a pan
is placed back on the burner within 3
minutes.
The booster can be switched off by
touching the
-
sensor.
The extra boost of energy is only
available by taking a proportion of
energy away from another burner. For
this reason, the burners are networked
in pairs as shown.
When the booster is activated:
– if Auto-heat is activated or either
burner of the same network, it will
switch off.
– the power level on the other linked
burner may decrease.
The original and reduced power
levels blink back and forth until the
Booster turns off. The reduced power
level is also represented by the
number of segments in the lighting
circle.
Use
23