Miele KM 5773 Operating and Installation manual - Page 28

Timer Combi mode Timer start value The timer and automatic switch-off functions can be used at the same time. The timer is factory set so that the + and - touch controls start at 01 and 99 respectively. If you are using the automatic switch-off function and would like to use the timer as well: ^ Touch the m sensor until the indicator light for the programmed burner(s) lights steadily and 00 appears in the display. If you are using the timer and would like to use the automatic switch-off function as well: ^ Touch the m sensor until the indicator for the desired burner flashes. These settings can be adjusted so that they start with the most recently set (and completed) time (see "Programming - P14"). Example: You entered Program P14, Status S1, with the timer most recently set to 5 minutes. When you switch on the timer, 00 appears in the display; when you then touch + or -, 05 appears. Note: If the setting is changed you can still select any time desired, as usual. After the last entry, the shortest remaining time will appear in the display. Toggle between functions Automatic switch-off function: Touch the m touch control until the indicator light for the desired burner flashes. Timer: Touch the m touch control until the indicator light for the desired burner is lit. Starting with the shortest remaining time which is shown in the display, all burners that are in use and the timer can be selected clockwise from left to right. 28