Miele KM 5773 Operating and Installation manual - Page 30

Stop and Go 30, To activate Stop and Go

Get Miele KM 5773 PDF manuals and user guides View all Miele KM 5773 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Safety features Stop and Go Your appliance has a Stop and Go feature which, when activated, reduces the power of all burners that have been switched on. If you then deactivate the feature, the burners will automatically return to the previous level. If the feature is not de-activated, the cooktop will turn off after 1 hour. If you wish to use this feature, you will need to alter the factory setting (see "Programming - P5"). To deactivate Stop and Go: ^ Press and hold the control $ until the indicator goes out. The burners will now run at the level previously set. To activate Stop and Go: ^ Press and hold the sensor $ until you hear two consecutive beeps. Be careful not to continue touching the $ sensor for too long, as this will activate the safety lock. The Child Safety Lock indicator will flash. The power for the activated burner(s) will reduce to level 1, and 1 will appear in the respective display. When activating "Stop and Go": - the countdown of the programmed time for the automatic switch-off function will be interrupted. When deactivating "Stop and Go", the countdown will continue, - the timer will continue without interruption. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Stop and Go
Your appliance has a Stop and Go
feature which, when activated, reduces
the power of all burners that have been
switched on.
If you then deactivate the feature, the
burners will automatically return to the
previous level.
If the feature is not de-activated, the
cooktop will turn off after 1 hour.
If you wish to use this feature, you will
need to alter the factory setting (see
"Programming - P5").
To activate Stop and Go:
^
Press and hold the sensor
$
until you
hear two consecutive beeps.
Be careful not to continue touching
the
$
sensor for too long, as this will
activate the safety lock.
The Child Safety Lock indicator will
flash. The power for the activated
burner(s) will reduce to level 1, and
1
will appear in the respective display.
When activating "Stop and Go":
– the countdown of the programmed
time for the automatic switch-off
function will be interrupted. When
deactivating "Stop and Go", the
countdown will continue,
– the timer will continue without
interruption.
To deactivate Stop and Go:
^
Press and hold the control
$
until the
indicator goes out.
The burners will now run at the level
previously set.
Safety features
30