Miele RX1 Robot Vacuum Product Manual - Page 11

en Functions and features of the robot vacuum cleaner The robot vacuum cleaner is suitable for the daily cleaning of short pile carpets, fitted carpets and hard flooring. Please observe the flooring manufacturer's cleaning and care instructions. The robot vacuum cleaner is fitted with a camera and various sensors. At the start of cleaning and during operation, the room plan as well as the items present in the room are stored in memory for the next time the room is vacuumed. The robot vacuum cleaner uses this data to create an efficient vacuuming plan of the surfaces to be vacuumed, which it can then vacuum autonomously. Accessories supplied - Two side brushes - Two replacement exhaust filters - Remote control / two batteries - Base station, including a cleaning brush - Power supply unit with connector - Power cord with plug - Magnetic strip Preparing for use Diagrams a - m for the "Preparing for use" section are at the end of these operating instructions. Insert the side brushes (dia. 1) ^ Place the robot vacuum cleaner upside down on a level, clean surface. Do not lift the robot vacuum cleaner by the area around the dust box as it can come loose. ^ Press the two side brushes supplied firmly but carefully onto the pins provided. Ensure that they match up correctly with the L and R markings. Remove the protective foil (dia. 2) ^ Remove the protective foil from the base station and from the top of the robot vacuum cleaner. Place the batteries in the remote control (dia. 3) ^ Remove the battery compartment cover. ^ Insert the two batteries supplied, making sure the polarity is correct. Switch on the robot vacuum cleaner (dia. 4) ^ Press the ON switch on the side of the robot vacuum cleaner. The rechargeable battery status and the Auto standard vacuuming mode indicators will light up in the display. 11