Motorola H715 Quick Start Guide - Page 3
Using A Se, Econd Phone?, Tips For Using H715, With Two Phones - bluetooth headset
UPC - 723755892651
View all Motorola H715 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
USING A SE Multipoint technology allows you to make and receive calls from two Bluetooth enabled devices like your personal and business phones. To pair a second phone to your headset, follow these steps: 1 Turn off any phones or devices that are already paired with your headset. 2 Turn off your headset by closing the headset boom. 3 Perform Step 2 ("Start Bluetooth Feature"), and Step 3 ("Pair"), and Step 4 ("Test and Use") to pair your headset with your second phone. To reconnect your headset with your first phone (and thus be connected to both phones), follow these steps: 1 Turn on first phone. ECOND PHONE? 2 Use your first phone to connect to your headset. a On your Motorola phone, press M (Menu) > Settings > Connection > Bluetooth Link > Audio Devices. The phone lists Bluetooth devices it finds. b Select Motorola H715. c Select OK or Yes. Your headset is now connected to both phones. The last paired phone (your second phone) is now your primary phone for voice dial functionality. After you have successfully paired both phones with your headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. TIPS FOR USING H715 WITH TWO PHONES Use the following tips when using H715's multipoint technology: ● Incoming calls can be answered from both phones: - When answering a call, the idle phone is disconnected from the headset. - When the call ends, the idle phone is automatically reconnected to the headset. ● Last number redial dials the last outgoing call made from either phone. ● Voice dial is accessible from either phone via different key actions: - For your primary device (last paired phone), tap the Call button until you hear the tone. - For your secondary device (other paired phone), tap the Call button and either Volume button until you hear the tone. TROUBLESHOOTING My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is flashing in blue, first turn off the other device, then close and reopen the headset boom. The indicator light becomes steadily lit in blue indicating the headset is now in pairing mode. My phone doesn't find my headset. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). My headset will not pair with my phone. Open the boom flip. Press and hold both Volume buttons and the Call button for more than 10 seconds. The indicator light flashes blue 3 times and then become steadily lit. The headset is now in pairing mode (see step 3B) to complete the pairing process. Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/Bluetoothsupport