Motorola HMVC3020 Quick Start Guide - Page 3

Installation Overview Installing your camera is a simple process. 1 Choose an appropriate location for the Wired Camera as described in the Installation Hints. 2 Plug the interface cable from the camera into the Wireless System Controller. 3 Your Wired Camera will automatically register with the homesight software when the Discovery process is started. Refer to your Wireless System Controller documentation for information on device discovery. 4 Mount the module, using either the tabletop base, or by following the instructions for wall mounting. Installation Hints Please consider the following points when mounting the camera: • The camera must be aimed so that it does not directly face the sun or any bright light; otherwise, this may cause damage to the camera. • Avoid viewing areas where half of the area is in bright sunlight and the other half is dark. All types of cameras have difficulty seeing wide variations of light. • The Motorola Wired Camera is constructed of UV-resistant ABS plastic. If installing the Wired Camera outside, it should be shielded from the elements, such as underneath a porch roof. Do not install the camera where it is subjected directly to the elements. 3