Motorola MBP35 User Guide - Page 17

ENGLISH 7. Help Display No display • Try recharging or replacing the batteries. • Reset the units. Unplug the units' electrical power, including the batteries and both mains adapters, then plug them back in. • Is the Press unit and truerlneeadseonp? on the parent unit to turn it on. Registration If the baby unit has lost its link with the parent unit • Try recharging or replacing the batteries. • If the baby unit is too far away it may be going out of range, so move the baby unit closer to the parent unit. • Reset the units by unplugging the units' batteries and mains electrical power. Wait for around 15 seconds and plug it back in again. Allow up to one minute for the baby unit and the parent unit to synchronise. • See "2.5 Registration" if there is a need to re-register the units. Interference Noise interference on your parent unit • Your baby and parent units may be too close. Move them further away from each other. • Make sure there is at least 1 metre between the 2 units to avoid feedback howling. • If the baby unit is too far away it may be going out of range, so move the baby unit closer to the parent unit. • Make sure the baby and parent units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. Help 17