Motorola MBP35 User Guide - Page 7

ENGLISH 2. Getting started 2.1 Baby unit battery installation The camera uses either 3 AA size batteries (non-rechargeable batteries recommended) or the household power mains. The Baby unit has no charging function! screw IMPORTANT The non-rechargeable batteries for the Baby unit are not supplied with your product. We recommend the batteries to be installed before use, so that the unit continues to work in the event of a mains power failure. 1. Loosen the screw in a counterclockwise direction using a small screwdriver. Remove the battery cover. 2. Install the 3 AA non-rechargeable batteries following the polarity as shown in the compartment. Close the battery compartment and tighten the screw in a clockwise direction. 3. Slide the power switch to the ON position. The power LED will light up in green. To switch off the baby unit, slide the power switch to the OFF position. NOTE When the battery level is low, the power LED will turn orange and will flash. WARNING Do not mix old batteries with new ones. Keep batteries away from small children. Do not short-circuit batteries or dispose of in fire. Remove the batteries if this device is not going to be used for a long period of time. Getting started 7