Motorola MOTONAV TN20 Software Update Instructions (TN20 & TN30) - Page 1

MOTONAV TN20 and TN30 software update Download & installations instructions for Windows® PCs The following instructions will walk you through the steps needed to download and install your software update on the Motorola MOTONAV TN20 or TN30 GPS navigation device. There are two basic steps for upgrading the software: (i) Download the software update to an SD memory card; and (ii) upgrade the GPS navigation device. This procedure should only be used for Windows® PCs. If you have any questions regarding the upgrade procedure, or encounter any issues during the upgrade process, or if you are using an Apple® Macintosh computer, please contact Motorola Consumer Care at 1.866.289.6686. 1 Before starting the download and upgrade procedure, please ensure the following pre-upgrade requirements are satisfied: - The MOTONAV GPS navigation device is fully charged. - You have a Personal or Laptop Computer running Windows® 2000, Windows® XP, or Windows® Vista, and at least 50MB of free disk space to download the MOTONAV software upgrade package. - The WinZip utility is loaded on your Personal or Laptop Computer. Note: A copy of WinZip can be downloaded from the Internet at http://www.winzip.com - You have an empty, formatted standard SD memory card with 50 MB capacity or greater. Note: If you have a micro SD memory card, a micro SD adapter is required. In this case, you must first insert the micro SD memory card into the adapter, as shown below. Micro SD Memory Card Micro SD Card Adapter - You have a standard SD memory card slot in your Personal or Laptop Computer, or a USB SD card reader (shown below), or a Motorola Enhanced Mini USB data cable (shown below). The data cable can be used to connect the MOTONAV GPS Navigation Device to your Personal or Laptop Computer. USB SD Card Reader Enhanced Mini USB Data Cable 1