Motorola MOTOROLA FLIPSIDE with MOTOBLUR User Guide - AT&T - Page 38

Tip: Your phone automatically reconnects networks you have used when they are in range and Wi-Fi power is on. Note: Your phone's Wi-Fi features and power levels are not allowed for outdoor operation in France. To avoid unlawful interference with radio signals, do not use the Wi-Fi features in France unless you are indoors. Bluetooth Handsfree Devices Note: This feature requires an optional accessory. Find it: Menu > Settings > Wireless & networks > Bluetooth settings Bluetooth settings Bluetooth Device name (your phone's name) Discoverable Make device discoverable Scan for devices Bluetooth devices (found device name) Pair with this device Turn on & scan Change your phone's Bluetooth name Let Bluetooth devices find your phone Connect 36 Wi-Fi® & Bluetooth® Connections To connect with a new device, you need to pair with it. You only need to do this once for each device-to connect again, just turn on the device. 1. Make sure the device you are pairing with is in discoverable mode. Refer to the guide that came with the device for details. 2. In Bluetooth settings, touch Bluetooth to turn on and scan. If Bluetooth power is already on, touch Scan for devices. 3. Touch a device to connect. 4. If necessary, touch OK, or enter the device passkey (like 0000) to connect to the device. When the device is connected, the Bluetooth indicator appears in the status bar. Note: Using a mobile device or accessory while driving may cause distraction and may be illegal. Always obey the laws and drive safely. After you connect: • To reconnect with a device, simply turn on the device or touch the device name in the Bluetooth devices list. • To disconnect a device, simply turn off the device, or touch the device name in the devices list and touch Menu > Disconnect.