Motorola NTN8496 User Manual - Page 48
Desktop Charger Troubleshooting
View all Motorola NTN8496 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
i500plus User's Guide Desktop Charger Troubleshooting If the battery is not charging and you see: A flashing yellow indicator - • The flashing yellow LED is used to indicate that the Charger's pocket is in a wait state. • If a battery is in the rear pocket, the rear pocket's LED continues to flash yellow until the battery in the front pocket is more than 90% charged (front pocket's LED is solid green). This is normal operation. • To protect your battery's life expectancy, the Charger does not rapid charge a battery when its temperature is below 5oC (41oF) or above 45oC (113oF). No LED indication • Check that the i500plus with battery, or a battery alone, is inserted correctly. • Make sure that the power supply is plugged into an appropriate AC outlet and that the connector is properly seated. • Rear pocket only: Remove the battery from the Charger. Use an ordinary pencil eraser to clean the three metal contacts on the battery and then place the battery in the Charger. • If the LED indicator remains turned OFF, the battery may be defective and should be replaced. Flashing red LED indicator • Remove the battery from the Charger. Use an ordinary pencil eraser to clean the three metal contacts on the battery and then place the battery in the Charger. • If the LED indicator remains turned OFF, the battery may be defective and should be replaced. Both LEDs flash red • This indicates that the incorrect power supply is plugged in. 42