Motorola SB4200 User Manual - Page 14

Introduction Before You Begin Installation & Configuration Troubleshooting FAQ Glossary License To cable outlet (step 2) To electrical outlet (step 4) SURFboard cable modem Cabling and Startup for a Single User Allow 5 to 30 minutes to power up the first time because the SURFboard cable modem must find and lock on the appropriate channels for communications. 1 Be sure your computer is on and the cable modem is unplugged. 2 Connect one end of the coaxial cable to the cable outlet or splitter. Connect the other end of the coaxial cable to the CABLE connector on the cable modem. Hand-tighten the connectors to avoid damaging them. 3 Insert the SURFboard Cable Modem CD-ROM into your CD-ROM drive. 4 Plug the power cord into the POWER connector on the cable modem and the electrical outlet. This turns your SURFboard cable modem on. You do not need to unplug it when not in use. 5 Check that the lights on the front of the cable modem cycle through this sequence: I Power flashes during the self-test and changes to solid green when the self-test is successfully complete. I Receive flashes while scanning for the receive channel and changes to solid green when the receive channel is locked. I Send flashes while scanning for the send channel and changes to solid green when the send channel is locked. I Online flashes while the cable modem downloads configuration data and changes to solid green when the download is complete. X Home Print Exit 9 SURFboard Cable Modem User Guide