Motorola T6300 User Manual - Page 53
Symptom, Try This, Message not, received, Heavy static or, interference, Channel and/or, code locked
UPC - 723755563117
View all Motorola T6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Symptom Try This: Message not received Confirm radios have the same channel and interference eliminator code settings. Make sure M is NOT being pressed while trying to listen. Reposition, replace, or recharge batteries. If QuieT6000 feature is on, transmit call tone before talking. Troubleshooting If QuieT6000 feature is on, with only VibraCall selected, a received call must be acknowleged by pressing any button (or a VOX activation) before the radio can receive any incoming transmissions. Obstructions and operating indoors, or in vehicles, may interfere -change location. Verify that the radio is not in Scan mode. Heavy static or interference Eavesdrop Reducer code is on, or setting does not match other radios; all radios must use the same Eavesdrop Reducer code. Radios are too close, they must be at least five feet apart. Radios are too far apart or obstacles interfering with transmission. Talk range is up to two miles in clear, unobstructed conditions. Channel and/or Make sure menu is unlocked. Unlock by pressing \ for three code locked seconds. 51