Motorola mc4000 User Guide - Page 10
Using your MultiSensor
View all Motorola mc4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Using your MultiSensor Reading the MultiSensor Dashboard. The Dashboard displays information reported by all the sensors, and signal, power and battery status. The Updated field tells you the last report time. Normally the device reports every 20 minutes. If you tap the device icon at the top of the dashboard, the dashboard will show you data from the most recent report. If you tap the Refresh button, the device will send a fresh report with up-to-the-minute data. If after installation you see a grayed-out dashboard, unplug your sensor, switch the battery off, and turn it back on. Then plug the sensor back in. Configure your MultiSensor for the way you want to use it. Tap the Dashboard tab at the bottom of the screen on your mobile app (the browser on your computer displays Dashboard on the top left). After a short delay, you should see the Dashboard screen with information displayed from your MultiSensor. • Tap any Dashboard sensor icon to enable and configure alerts, and to view history. If you'd like, you can set alerts for any sensor. For instance, you may want to be alerted if there's water on your floor or if the temperature drops below 47 degrees, or if there's a power loss. Follow the on-screen instructions for details and read the next section for additional assistance. 9