Motorola mc4000 User Guide - Page 27

Safety Precautions These precautions help protect you and your MultiSensor.  Do not put the MultiSensor or its power cube in water, since this is a shock hazard.  The MultiSensor should normally be installed indoors. If you use it outdoors, it must be sheltered from rain. The MultiSensor is NOT waterproof.  The USB power adapter provided with the MultiSensor has a maximum ambient operating temperature of 104° Fahrenheit (40° Centigrade). In order to operate the MultiSensor at higher temperatures, you must use a power adapter or other USB power source that is rated for your desired maximum ambient operating temperature. When a backup battery is installed, your MultiSensor can be operated in an environment that's between -30 and 122° Fahrenheit (-35 to 50° Centigrade) if the power adapter or source in use is also suitably rated. If a backup battery is not being used, the environment can be between -30 and 167° Fahrenheit (-35 to 75° Centigrade), if the power adapter or source in use is also suitably rated.  Your MultiSensor should not be in a very small confined space. There should be some room for air flow around the top, front, and sides of the MultiSensor.  Make sure to use your MultiSensor's provided USB power cube or equivalent, and a compatible electrical outlet. Regulatory Information Interference statement This device complies with Part 15 of the FCC Rules and Industry Canada licenseexempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. FCC Class B digital device notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency