Motorola mg7550 User Guide - Page 12

What if I don't know my MG7550's Wireless Network Name/SSID or Security Key/Password? The default values are printed on the bottom label of the MG7550. Use these unless you changed them. If you changed them, try to remember where you put the new values. If you have a device that connects wirelessly to the MG7550, it may show the Wireless Network Name/SSID and Password. You can also find this information in the MG7550 Configuration Manager. Information about using this is in the Configuration Manager section above. If all else fails, reset the device to factory defaults by holding the Reset button for 10 seconds. You can then use the default values. What if I think that wireless devices are interfering with my MG7550 wireless router? 1. Where possible, put the MG7550 as far away as possible from interfering devices such as Bluetooth transmitters and neighbors' Wi-Fi routers. 2. To try to pick a less used wireless channel for your MG7550, first go in to your MG7550's Configuration Manager. 3. Click the Advanced button at the top of the page, then click the Wireless and Scan/Bridge menu items at the top of the page. 4. Click the ScanWirelessAPs button. A list will appear of competing wireless networks, including the channels they are using. Write down one or more of the less used channel numbers, since a less used channel should be better for your MG7550. 5. On the top of the page, click the Wireless Basic menu item. 6. On the Basic page, select the channel you want in the Channel pulldown, then click Save. Do you have any other questions? We have lots more information at www.motorolacable.com/mentor