Mr. Coffee CG12 User Manual - Page 6

Preparing For Use

Page 6 highlights

To Set the Delay Brew Time: After setting the clock, simply press and hold the SET DELAY button (Figure 1), and set the brew time by pressing the HOUR and MINUTE buttons. The AM or PM indicator will light at the top of the clock display. NOTE: To activate the Delay Brew cycle, see the "Brewing Coffee Later" section. Figure 1 To check the programmed time, push the SET DELAY button. The display will show the time you have programmed the coffee to brew. If you press the SET DELAY button again or wait a few seconds, the display will switch back. To cancel DELAY BREW: Press the DELAY BREW button until all lights turn off. PREPARING FOR USE Selecting and Measuring Ground Coffee: For best results, use a level tablespoon for ground coffee measurement. Make sure you use medium grind coffee for a perfect brew. Suggested Coffee Measurement Chart: To Brew 12 Cups 10 Cups 8 Cups 6 Cups 4 Cups Ground Coffee 9 tbsp. 7.5 tbsp. 6.5 tbsp. 4.5 tbsp. 3 tbsp. 1 level tablespoon (tbsp) = 5 gr./0.17 oz. 1 cup = 5 fl. oz. of brewed coffee Use more or less coffee to suit your taste. 10 BVMC-CG12CUP_12ESM1.indd 11-12 Water Filtration System: (not included with all models) Using the Mr. Coffee® carbon-based water filter in the Mr. Coffee® coffeemaker during the brewing process helps remove up to 97% of the chlorine from the water and improves the taste of your coffee. First, look for the MR. COFFEE® Filter Friendly symbol on the bottom of your filter basket. If you do not see this symbol, please call 1-800-672-6333. To use the water filtration system in your MR.COFFEE® Coffeemaker, please follow these steps: 1. Align the red indicator on the frame to the letter that corresponds with the month that you are using the disk for the first time. This serves to remind you to change the disk every month (approx. 30 brewing cycles). 2. Rinse the water filter in fresh water before first use. 3. Follow "Adding Water and Ground Coffee" Instructions in the next section. 4. When you are done brewing your coffee, rinse the water filter with fresh water. Do not put your water filter in the dishwasher. NOTE: For optimum results, use the water filtration system with a permanent filter. Disk & Frame Red Indicator Permanent Filter Top of filter 11 10/18/12 2:13 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

10
11
Water Filtration System: (not included with all models)
Using the Mr. Coffee
®
carbon-based water filter in the
Mr. Coffee
®
coffeemaker during the brewing process helps
remove up to 97% of the chlorine from the water and
improves the taste of your coffee. First, look for the MR. COFFEE
®
Filter Friendly symbol on the bottom of your filter basket.
If you do not see this symbol, please call 1-800-672-6333.
To use the water filtration system in your MR.COFFEE
®
Coffeemaker, please follow these steps:
1. Align the red indicator on the frame to the letter that
corresponds with the month that you are using the disk
for the first time. This serves to remind you to change the
disk every month (approx. 30 brewing cycles).
2. Rinse the water filter in fresh water before first use.
3. Follow “
Adding Water and Ground Coffee
” Instructions
in the next section.
4. When you are done brewing your coffee, rinse the water
filter with fresh water. Do not put your water filter in the
dishwasher.
NOTE:
For optimum results, use the water filtration system
with a permanent filter.
Top of filter
Disk & Frame
Red Indicator
Permanent
Filter
To Set the Delay Brew Time:
After setting the clock, simply press
and hold the SET DELAY button
(Figure 1), and set the brew time
by pressing the HOUR and MINUTE
buttons. The AM or PM indicator
will light at the top of the clock
display.
NOTE:
To activate the
Delay Brew
cycle, see the “
Brewing Coffee
Later
” section.
To check the programmed time, push the SET DELAY button.
The display will show the time you have programmed the
coffee to brew. If you press the SET DELAY button again or wait
a few seconds, the display will switch back.
To cancel DELAY BREW:
Press the DELAY BREW button until all
lights turn off.
PREPARING FOR USE
Selecting and Measuring Ground Coffee:
For best results, use a level tablespoon for ground coffee
measurement. Make sure you use medium grind coffee for a
perfect brew.
Suggested Coffee Measurement Chart:
To Brew
Ground Coffee
1 level tablespoon
(tbsp) = 5 gr./0.17 oz.
1 cup = 5 fl. oz. of
brewed coffee
Use more or less coffee
to suit your taste.
12 Cups
9 tbsp.
10 Cups
7.5 tbsp.
8 Cups
6.5 tbsp.
6 Cups
4.5 tbsp.
4 Cups
3 tbsp.
Figure 1
BVMC-CG12CUP_12ESM1.indd
11-12
10/18/12
2:13 PM