NEC 60XM5 User Manual - Page 25

Option1 Settings Menu Setting the on-screen menu This sets the position of the menu, the display format (horizontal or vertical) etc. Example: Turning the DISPLAY OSM off On "OPTION1" menu, select "OSM", then press the MENU/ ENTER button. The "OSM" menu appears. On "DISPLAY OSM" of "OSM" menu, select "OFF". OSM DISPLAY OSM : OSM ADJ. : OSM ANGLE : OSM ORBITER : OSM CONTRAST : OFF 1 H OFF LOW SEL. ADJ. EXIT RETURN Information Ⅵ DISPLAY OSM settings ON: The informations on screen size, volume control, etc. will be shown. OFF: The informations on screen size, volume control, etc. will not be shown. The DISPLAY button on the remote control will not function either. Ⅵ OSM ADJUST settings Adjusts the position of the menu when it appears on the screen. The position can be set between 1 to 6. Ⅵ OSM ANGLE settings Sets the display format (landscape "H" or portrait "V"). When the unit is installed vertically set the OSM ANGLE at "V". "H" "V" OPTION 1 OSM BNC INPUT : RGB D-SUB INPUT : RGB RGB SELECT : AUTO HD SELECT : 1080B INPUT SKIP : OFF ALL RESET : OFF NEXT PAGE SEL. MENU/ENTER OK EXIT RETURN 1 / 4 OPTION1 OSM BNC INPUT : RGB D-SUB INPUT : RGB RGB SELECT : AUTO HD SELECT : 1080B INPUT SKIP : OFF ALL RESET : OFF 1024‫؂‬768 SEL. MENU/ENTER OK EXIT RETURN Setting the BNC input connector type Select whether to set the input of the 5 BNC connectors to RGB, Component or SCART1,2. Example: Set the "BNC INPUT" mode to "COMP." On "BNC INPUT" of "OPTION1" menu, select "COMP.". OPTION 1 OSM BNC INPUT : COMP. D-SUB INPUT : RGB RGB SELECT : AUTO HD SELECT : 1080B INPUT SKIP : OFF ALL RESET : OFF NEXT PAGE SEL. ADJ. EXIT RETURN 1 / 4 Information Ⅵ BNC INPUT Settings RGB: Use the 5BNC terminals for RGB input. COMP.: Use the 3BNC terminals for component input. SCART1: Use the 4BNC terminals for RGB with composite sync. See page En-9. SCART2: Use the 3BNC terminals for RGB and the VIDEO1 terminal for composite sync. See page En-9. Setting the RGB1 connector Select one of the signals being transmitted to the RGB1 terminal. Example: Set the "D-SUB INPUT" mode to "SCART3" On "D-SUB INPUT" of "OPTION1" menu, select "SCART3". OPTION 1 OSM BNC INPUT : RGB D-SUB INPUT : SCART3 RGB SELECT : AUTO HD SELECT : 1080B INPUT SKIP : OFF ALL RESET : OFF NEXT PAGE SEL. ADJ. EXIT RETURN 1 / 4 Information Ⅵ D-SUB INPUT Settings RGB: Use the D-SUB terminal for RGB input. SCART3: Use the D-SUB terminal for RGB signal fed from SCART. See page En-9. * The menu language for "V" is English only. * Some menu items including LONG LIFE mode will not be displayed with "V", but can be performed by setting with "H" (See pages 19 and 20 for the menu items that can be displayed with "V"). Ⅵ OSM ORBITER settings ON: The position of the menu will be shifted by eight dots each time OSM is displayed. OFF: OSM will be displayed at the same position. Ⅵ OSM CONTRAST settings NORMAL: OSM brightness is set to normal. LOW: OSM brightness is set to lower. En-24