NEC 900 User Guide - Page 23
Loading USB Files, Verifying PC Connection Settings
UPC - 050927240997
View all NEC 900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Loading USB Files Before you connect the USB PC Connect cable, use the following procedure to load the required USB files from the NEC MobilePro 900 Application and Driver CD to your host PC. 1. Insert the NEC MobilePro 900 Application and Driver CD in the CD-ROM drive of your host PC. ! If auto-insert is enabled on your host PC, the CE Setup menu appears. ! If auto-insert is not enabled, go to Start, Run, and browse for the CD-ROM drive. 2. From the CE Setup menu, select "USB Driver Install." 3. Read the license agreement and click OK to accept it. The CE Setup program installs the USB driver. 4. When an installation "complete" message is displayed, click Finish. The program goes back to the CE Setup menu. Continue to the next section to verify the PC Connection settings. Verifying PC Connection Settings Your MobilePro ships with PC Connection default settings. Follow these steps to verify the accuracy of the PC Connection settings. 1. Tap Start, Settings, Control Panel. 2. Double tap the Communications icon and select the PC Connection tab. 3. Verify the following settings: ! "Allow connection with desktop computer when device is attached" is checked. ! "Connect using: 'USB Connection'" is displayed. If this setting is not displayed, change the setting. Getting Started 1-15