NEC 900 User Guide - Page 40
Synchronizing with Your Host PC, Synchronizing via the USB or Serial Port - c manual
UPC - 050927240997
View all NEC 900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Synchronizing with Your Host PC Once your MobilePro is configured for synchronization with your host PC, synchronization occurs when the ActiveSync components on the MobilePro and on the host PC are activated. When synchronizing via the USB or serial port, the process occurs automatically. When synchronizing via the infrared port, manual intervention is required. Refer to the next two sections for details about synchronizing with your host PC. Synchronizing via the USB or Serial Port Once the MobilePro is configured for synchronization, the synchronization process automatically occurs each time you connect the MobilePro to your host PC via the USB or serial port. In addition, you can manually initiate the synchronization process using Microsoft ActiveSync on your host PC. Simply open the ActiveSync window, click File, and click Synchronize. Synchronizing via the Infrared Port Once the MobilePro is configured for synchronization via the infrared port, the ActiveSync component on the MobilePro must be manually activated to initiate the synchronization process. Simply tap Start, Programs, Communication, and ActiveSync to initiate synchronization via infrared. Resynchronizing Your MobilePro Once synchronized, you may need to re-establish communication between the MobilePro and your host PC if you soft reset the MobilePro or if you warm boot your host PC. To re-establish communication between the MobilePro and your host PC, do one of the following procedures: ! Disconnect, then reconnect the PC Connect cable. ! Power off, then power on the MobilePro unit. 1-32 Getting Started