NEC DT100 User Manual - Page 43
Maintenance
UPC - 050927235498
View all NEC DT100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Ofrecido por www.electromanuales.com Maintenance Maintenance I Protection from Overheating Your projector is provided with internal protection circuits for preventing fire and damage to internal components caused by abnormal temperature rises inside. When the ALARM indicator is blinking: G Action 1. Pull out the power plug from the power outlet. 2. Install the air filter correctly. * If the LAMP indicator is also blinking, replace the lamp unit a new one. (See page E-42, "Replacing the Lamp unit.") When the ALARM indicator is lit: G Action 1. Pull out the power plug from the power outlet. 2. Check the following and take the necessary steps to alleviate the problem. Ambient temperature is more than 35°C/95°F. Place your projector in an area having an ambient temperature of 0°C/32°F to 35°C/95°F. Vent holes are blocked. Air filter is clogged. Place your projector well clear of surrounding objects such as walls, etc. Refer to "Do not block the air vents" on page E-4. Clean the air filter. Refer to "Cleaning the Air filter" on page E-47. Problem in internal circuitry. Call qualified service personnel. * When the ALARM indicator is out, your projector is working correctly. E-43