NEC DT100 User Manual - Page 44
When the Power Supply Stops All Indicators Remain OFF When Power Switch is
UPC - 050927235498
View all NEC DT100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Ofrecido por www.electromanuales.com G When the Power Supply Stops (All Indicators Remain OFF When Power Switch is ON) ❍ Action 1. Pull out the power plug from the power outlet. 2. Check the following and take the necessary steps to alleviate the problem. Ambient temperature is more than 35°C/95°F. Vent holes are blocked. Lamp unit cover is not securely in place. Problem in internal circuitry. Place your projector in an area having an ambient temperature of 0°C/32°F to 35°C/95°F. Place your projector well clear of surrounding objects such as walls, etc. Refer to "Do not block the air vents" on page E-4. Install the cover securely. Refer to "Replacing the Lamp unit" on page E-45. Call qualified service personnel. E-44
E-44
●
When the Power Supply Stops (All Indicators Remain OFF When Power Switch is ON)
❍
Action
1. Pull out the power plug from the power outlet.
2. Check the following and take the necessary steps to alleviate the problem.
Place your projector in an area having
an ambient temperature of 0
°
C/32
°
F to 35
°
C/95
°
F.
Ambient temperature is
more than 35
°
C/95
°
F.
Vent holes are blocked.
Lamp unit cover is not
securely in place.
Problem in internal circuitry.
Call qualified service personnel.
Install the cover securely.
Refer to "Replacing the Lamp unit" on page E-45.
Place your projector well clear of
surrounding objects such as walls, etc.
Refer to "Do not block the air vents" on page E-4.