NEC EA232WMi MultiSync EA232WMi-BK : user manual - Page 12
Flexible Arm Installation, F.1
View all NEC EA232WMi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
8. Reverse this process to re-attach stand. NOTE: Use only VESA-compatible alternative mounting method. Handle with care when removing stand. NOTE: Match "TOP SIDE" mark on stand to top side of the monitor head when re-attaching stand. "TOP SIDE" mark Please match top side of the monitor Hole of " " mark Please assemble then together Flexible Arm Installation This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm: 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Using the 4 screws from the stand removal, attach the arm to the monitor (Figure F.1). NOTE: 1. When mounting, use ONLY the screws (4 pcs) that were removed from the stand to avoid damage to the monitor or stand. 2. The LCD monitor should only be used with an approved arm (e.g. GS mark). To meet the safety requirements, the monitor must be mounted to an arm, which ensures the necessary stability under consideration of the weight of the monitor. 3. The mounting stand must be able to sustain at least 20 kg and be UL certified. 100 mm Thickness of Bracket (Arm) 2.0~3.2 mm 4 Screws (M4) (Max Depth: 8.5 mm) Additional 4 VESA 100 mm Figure F.1 Weight of LCD assembly: 5.0 kg MAX An additional 4 VESA holes are provided for those users needing a lower monitor head position, than that available from the monitor stand in shipping configuration. The monitor stand can be re-attached using the 4 screws to the lower position VESA holes. NOTE: 1. The monitor head tilt function may have impaired operation when attached to the lower position VESA holes. 2. The monitor head pivot function should not be used when attached to the lower position VESA holes. English-10