NEC LT265 LT245/265 UM - Page 25
Installation and Connections, To connect SCART output RGB
UPC - 050927247354
View all NEC LT265 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
2. Installation and Connections NOTE: The LT265/LT245 is not compatible with video decoded outputs of either the NEC ISS-6020 and ISS-6010 switchers. NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan converter. This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following. * When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly: Project an image to fill the screen and then press the AUTO ADJ button on the remote control or the AUTO ADJUST button on the projector cabinet. * When noise appears on the sides of the screen: Use the Overscan feature to display the image correctly. Be sure to change the Overscan to 0% before pressing the AUTO ADJ or AUTO ADJUST button, otherwise an image may be displayed with its sides cut off. To connect SCART output (RGB) Video equipment such as DVD player Female COMPUTER 1 IN AUDIO OUT PC CARD R AUDIO IN L LAN USB VIDEO IN S-VIDEO IN PC CONTROL COMPUTER 1 IN AUDIO IN COMPUTER 2 IN AC IN Projector MONITOR OUT Commercially available SCART cable ADP-SC1 Before connections: An exclusive SCART adapter (ADP-SC1) and a commercially available SCART cable are required for this connection. NOTE: Audio signal is not available for this connection. 1. Turn off the power to the projector and your video equipment. 2. Use the NEC ADP-SC1 SCART adapter and a commercially available SCART cable to connect the COMPUTER 1 IN connector of your projector and a SCART output (RGB) of your video equipment. 3. Connect the supplied power cable. See page 26. 4. Turn on the power to the projector and your video equipment. 5. Use the COMPUTER 1 button on the remote control to select the COMPUTER 1 IN connector. 6. Press the MENU button on the remote control to display the menu. 7. From the menu, select [Setup] → [Options] → [Signal Select] → [Computer 1] → [Scart]. SCART is a standard European audio-visual connector for TVs, VCRs and DVD players. It is also referred to as Euro-connector. NOTE: The ADP-SC1 SCART adapter is obtainable from your NEC dealer in Europe. Contact your NEC dealer in Europe for more information. 18